For Chimney & Fireplace Repair Near Shreveport, Hire New Buck Chimney
We’re proud to bring the best in chimney repair and fireplace repair to Shreveport, Frierson, and more. If you’re seeking quality chimney repair services near you, look no further than New Buck. Our experienced and educated technicians are here to help you out. Book with us today.
What Type of Fireplace & Chimney Repair Services Do We Offer?
- We repair and replace fireplace dampers. The damper of the chimney is used to control air flow within the system. It can be easily opened to allow more air into the home (resulting in a higher flame), or closed to prevent air intake or loss (perfect for preserving conditioned air and reducing draft). However, when your damper is not working properly, your system can suffer from inefficiency and smoke problems.
- We repair wood stoves. Wood stoves offer comfort and a classic appeal – when they’re working properly, that is. A wood stove that is not properly maintained can be a smoky, dirty fire hazard. At New Buck Chimney Services, we have the skills and tools to repair every part of your wood stove, so that you can enjoy its charm and warmth for years to come.
- We reline damaged chimneys. When your chimney liner is incorrectly sized, damaged, or deteriorating, your family’s safety, as well as the structural integrity and lifespan of your chimney, are at risk. A liner is designed to contain all of the byproducts of a fire and push them out of the home through the chimney – and when the liner has holes, cracks, or other damages, it cannot properly do its job. We work with only the finest stainless steel liners that are backed by a lifetime guarantee when installed by one of our professionals.
- We resurface chimney liners. Resurfacing a chimney liner with HeatShield is an effective way to restore the safety and efficiency of your chimney – just without the need for a full liner replacement. HeatShield is a specially formulated ceramic coating designed to repair and resurface damaged or deteriorating flue liners, sealing gaps, cracks, and worn mortar joints that can compromise the chimney’s performance.
- We rebuild fireboxes. Because the firebox is the hottest part of the fireplace and chimney system, it must be constructed of extremely strong and durable firebrick. If it is not constructed of the proper materials, your firebox will show signs of damage and deterioration after only a short while. In this case, you will need significant repairs or rebuild services to ensure the safety and efficiency of your system.
We Also Address Leaky Chimney Issues
Chimney leaks can be caused by damaged or missing chimney caps, improperly built chimney crowns, deteriorated or improperly installed flashing, deteriorating masonry, and more. At New Buck Chimney Services, we have the experience and knowledge to quickly address the source of the leak, make the appropriate repairs, and get your fireplace and chimney system up and running again in no time.
If you need assistance, or if you want to book a chimney inspection, reach out to our technicians today. Call or book online now.
How Can I Prevent Fireplace & Chimney Damage?
No one likes shelling out the big bucks for chimney and fireplace repairs, so finding ways to prevent damage in the first place is always the preferred route. That said, preventing fireplace and chimney damage requires regular maintenance, proper usage, and attention to key safety measures, so it’s important to be diligent.
This is a big reason why booking annual chimney sweep and inspection services is so imperative. Doing so gives sweeps the opportunity to spot issues early before they become big and costly to address. Your technician can also ensure the chimney is fitted with appropriate components, like chimney caps, flashing, chase covers, and more, as well as get your chimney professionally waterproofed.
That said, there are things you can do in the meantime, such as use your fireplace correctly and according to manufacturer instructions, burn appropriate fuel (like well-seasoned wood), practice safe burning methods, and consistently monitor the state of your chimney and its masonry.
How Do I Know if My Chimney Needs Repairs?
Chimneys rarely fail all at once. Most problems start small and develop gradually, often giving off warning signs months or even years before they turn into major repairs. Knowing what to look for can save you a significant amount of money and protect your home from water damage and fire hazards.
Here are the most common signs that your chimney or fireplace needs attention:
- Crumbling or missing mortar. Look at the joints between the bricks on your chimney’s exterior. If the mortar looks sandy, recessed, cracked, or is missing altogether, the chimney is losing its ability to keep water out and hold its structure together. This is one of the clearest signs that tuckpointing is needed.
- Spalling brick. Spalling happens when water soaks into brick and causes the surface to flake, chip, or pop off. If you see pieces of brick on your roof, in your gutters, or on the ground near your chimney, water is actively damaging the masonry.
- White staining (efflorescence). A chalky white residue on your brick is caused by water moving through the masonry and leaving mineral deposits behind as it evaporates. Efflorescence itself is mostly cosmetic, but it’s an early warning sign of a moisture problem that will eventually cause real damage.
- Water leaks or stains inside your home. Water stains on the ceiling or walls near your chimney, dampness in the fireplace, or puddles in the hearth are signs that water is getting in somewhere. Common entry points include a cracked crown, missing cap, deteriorated mortar, or failing flashing where the chimney meets the roof.
- Rust on the damper or firebox. Rust is a telltale sign of moisture inside the chimney. A rusted damper may also stop opening and closing properly, which affects both safety and energy efficiency.
- Cracked or crumbling firebrick. Inspect the inside of your firebox with a flashlight. Cracked bricks, gaps in the mortar joints, or pieces of brick and mortar falling into the firebox are signs that it needs repair or rebuilding.
- Smoke stains on the fireplace face. Dark staining above the fireplace opening usually means smoke is escaping into your living space rather than venting up the chimney. This often signals a drafting problem.
- A leaning or tilting chimney. If your chimney appears to be pulling away from the house or leaning, it may have foundation or structural issues. This is a serious concern that should be evaluated as soon as possible.
- A damaged or missing chimney cap. Without a working cap, your chimney is exposed to rain, animals, and debris every single day.
- Pieces of tile or debris in the firebox. Fragments of clay flue tile in your fireplace may indicate a damaged flue liner, which is a serious safety concern.
If you notice any of these signs, don’t wait for things to get worse. Give us a call, and we’ll help you understand what’s going on and what needs to be done.
What Causes Chimney Damage?
A chimney is one of the most exposed structures on your home. It stands above the roofline, takes the full force of the weather from every direction, and has to withstand intense heat from the inside. Over time, a combination of factors wears it down:
- Water. Water is the single biggest enemy of masonry chimneys. Brick and mortar are porous, which means they absorb moisture. Over time, that moisture erodes mortar joints, causes brick to spall, rusts metal components like dampers and fireboxes, deteriorates the smoke chamber, and cracks flue tiles. Here in the Ark-La-Tex, heavy rainfall, frequent storms, and high humidity make water damage a year-round concern.
- Freeze-thaw cycles. While our winters are milder than in many parts of the country, we still experience freezing nights. When water that has soaked into masonry freezes, it expands and creates tiny cracks. Those cracks let in more water the next time it rains, and the cycle repeats and worsens with each freeze.
- Heat stress. The firebox and flue are exposed to repeated heating and cooling every time you use your fireplace. Over years of use, this constant expansion and contraction weakens firebrick, mortar, and flue liners.
- Age. Even with perfect care, mortar doesn’t last forever. Mortar typically wears out much faster than the brick around it, which is why many older chimneys need tuckpointing even when the bricks themselves are in good shape.
- Poor original construction. Many chimney problems trace back to how the chimney was built. Crowns made with standard mortar instead of a proper concrete mix, crowns without an overhang to shed water, and fireboxes built with the wrong materials are all common issues we see.
- Chimney fires. Creosote fires can burn at extremely high temperatures, cracking flue tiles, damaging mortar, and weakening the entire structure. Some chimney fires go completely unnoticed by homeowners but still leave lasting damage behind.
- Settling and structural movement. As a home settles over the years, the chimney can shift, which may cause cracks in the masonry, separation from the house, or damage to the flue.
- Storms and impact. High winds, falling tree limbs, and lightning strikes can physically damage a chimney’s crown, cap, and masonry.
Understanding what caused the damage is just as important as fixing it. When we make a repair, we also look for the root cause so the same problem doesn’t keep coming back.
What Is Tuckpointing? Why Is It Important?
Tuckpointing is the process of repairing the mortar joints between the bricks of your chimney. Over time, mortar erodes, cracks, and crumbles due to water, weather, and age. During tuckpointing, we carefully remove the deteriorated mortar to a consistent depth and then pack in fresh mortar, restoring the joints to a solid, watertight condition.
You may also hear the term “repointing.” Technically, tuckpointing originally referred to a specific decorative technique, but today the two terms are widely used to describe the same repair: replacing old, failing mortar with new mortar.
Here’s why tuckpointing matters so much:
- It keeps water out. Mortar joints are the most vulnerable part of a masonry chimney. Once they start to fail, water can penetrate deep into the chimney, where it causes damage you can’t see until it becomes a much bigger problem.
- It protects your chimney’s structure. Mortar is what holds the bricks together. As it deteriorates, bricks can loosen, shift, and eventually fall out. In advanced cases, a chimney with severely failing mortar can become structurally unstable.
- It prevents more expensive repairs. Tuckpointing is far less costly than rebuilding sections of a chimney. Addressing failing mortar early is one of the most cost-effective ways to extend the life of your chimney.
- It improves curb appeal. Fresh, clean mortar joints can make an older chimney look dramatically better and help it blend seamlessly with the rest of your home’s exterior.
Signs that your chimney may need tuckpointing include mortar that looks sandy or crumbles when touched, joints that are recessed or missing, visible cracks, loose bricks, and water leaks near the chimney.
What Causes Smoke Stains? Can They Be Removed?
Smoke stains are the dark, sooty marks that often appear on the brick, stone, or surround just above your fireplace opening. While they’re certainly unsightly, they’re also an important clue. In most cases, smoke staining means smoke is escaping into your living space instead of traveling up and out of the chimney.
Common causes of smoke stains include:
- Drafting problems. If your chimney isn’t drawing air properly, smoke can spill out of the fireplace opening rather than rising up the flue. Draft issues can be caused by many factors, including a cold flue, blockages, or structural design problems.
- A blocked or dirty flue. Heavy creosote buildup, animal nests, or debris can restrict airflow and force smoke back into the room.
- A closed or partially closed damper. Starting a fire before the damper is fully open is a common mistake that sends smoke straight into the room.
- Burning wet or unseasoned wood. Wood with high moisture content produces significantly more smoke than properly dried wood, increasing the chances of staining.
- Negative pressure in the home. Modern homes are built tightly, and exhaust fans, range hoods, clothes dryers, and HVAC systems can pull air down the chimney, causing smoke to flow into the room instead of up.
- Fireplace and flue sizing issues. If the fireplace opening is too large relative to the size of the flue, the chimney may not be able to pull all the smoke out efficiently.
The good news is that smoke stains can usually be removed. We clean the affected surfaces to restore the appearance of your fireplace. More importantly, we help identify why the staining happened in the first place. Removing the stain without addressing the cause means it will simply come back, and the underlying problem could also be exposing your family to smoke and carbon monoxide.
What Happens if I Put Off Chimney Repairs?
It’s tempting to delay a repair, especially if the chimney seems to be working fine or the damage is out of sight on the roof. Unfortunately, chimney problems almost never fix themselves. In nearly every case, they get worse over time, and the longer they’re left alone, the more expensive they become.
Here’s what can happen when repairs are delayed:
- Small problems become big problems. A hairline crack in a crown or a few deteriorating mortar joints may be a simple repair today. Left alone, water entering through those openings can damage the brick, the flue liner, the smoke chamber, and the damper. What started as a minor repair can turn into extensive masonry work.
- Water damage spreads into your home. Once water gets into the chimney, it doesn’t always stay there. It can travel into your attic, walls, and ceilings, causing stained drywall, rotted wood framing, damaged insulation, and potential mold growth. Those repairs often go well beyond the chimney itself.
- Safety risks increase. A deteriorating firebox, damaged flue liner, or structural problem creates real fire and carbon monoxide hazards. Using a fireplace in poor condition puts your home and family at risk.
- Structural failure becomes possible. In severe cases, long-term water damage and mortar failure can cause bricks to loosen and fall, or even lead to partial chimney collapse.
- Insurance may not cover the damage. Many homeowners insurance policies don’t cover damage caused by gradual deterioration or lack of maintenance. Putting off a known repair can leave you paying the full cost of the resulting damage.
Addressing chimney repairs early is almost always the most affordable option. That said, we understand that not every repair fits into the budget right away. If you need to prioritize, we’ll help you figure out which repairs are most urgent and which can be safely planned for later.
Do I Need an Inspection Before Repairs Can Be Made?
In most cases, yes. An inspection is the foundation of any good repair. It allows us to see the full picture of your chimney’s condition, identify the root cause of the problem, and recommend the right solution, rather than simply patching the most visible symptom.
Here’s why an inspection matters before repairs:
- It reveals hidden damage. A visible problem, such as a water stain on your ceiling, is often only one piece of the puzzle. An inspection can uncover related issues, such as a cracked crown, failing mortar, or a damaged flue, that need to be addressed for the repair to truly solve the problem.
- It identifies the cause. If we repair damage without knowing what caused it, the same problem will likely return. For example, repairing a rusted damper without fixing the water entry point above it only delays the next failure.
- It helps you prioritize. Not every issue is equally urgent. An inspection allows us to separate immediate safety concerns from issues that can be planned for later, so you can make decisions that fit your budget.
- It ensures your fireplace is safe to use. After repairs, you want confidence that your entire chimney system, not just the repaired area, is in good working order.
Our standard chimney service includes a complete cleaning, smoke shelf vacuuming, a Level 1 inspection, a full assessment of your fireplace’s condition, and repair planning and recommendations. If we find issues, we’ll walk you through what we found, explain your options, and help you plan the next steps.
How Can I Prevent Future Chimney Damage?
While no chimney lasts forever, a few simple habits can dramatically extend its lifespan and help you avoid costly repairs down the road:
- Schedule an annual inspection. The NFPA recommends having your chimney inspected at least once a year. Regular inspections catch small problems, like a hairline crown crack or the first signs of mortar wear, while they’re still simple and affordable to fix.
- Install a chimney cap. A cap is one of the most cost-effective ways to protect your chimney. It keeps rain from falling directly into the flue, blocks animals and debris, and helps prevent embers from escaping.
- Address small repairs promptly. When an inspection reveals an issue, fixing it early prevents it from turning into a larger, more expensive problem. Water damage, in particular, gets worse quickly.
- Burn only dry, seasoned firewood. Wet or unseasoned wood produces more smoke and creosote, which increases the risk of chimney fires and accelerates wear on your flue. Properly seasoned firewood should have a moisture content below about 20%, which usually takes at least six months of drying after splitting.
- Burn hot, well-ventilated fires. Slow, smoldering fires produce more creosote. Give your fire enough air to burn cleanly and efficiently.
- Keep your chimney swept. Regular cleaning removes creosote buildup, reducing the risk of chimney fires that can crack flue tiles and damage masonry.
- Watch for warning signs. Keep an eye out for water stains, crumbling mortar, white staining on brick, rust on the damper, smoke stains, or unusual odors. If you notice anything unusual, give us a call.
- Trim nearby trees. Overhanging branches can damage your chimney during storms, drop leaves and debris into the flue, and give animals an easy path to the top of your chimney.
A little preventive care goes a long way toward keeping your chimney safe, functional, and looking its best for years to come.
Hire Us to Repair Your Chimney & Fireplace
When it comes to keeping your chimney and fireplace in top condition, trust the experts at New Buck Chimney. With years of experience serving Shreveport and the surrounding areas, we’re dedicated to providing reliable, high-quality chimney repairs that ensure your home stays safer, warmer, and more comfortable.
From minor masonry fixes to comprehensive fireplace restorations, we handle it all with professionalism and care. Call us now or fill out our online form to schedule your service.
In addition to keeping your chimney swept and in good condition, our trained staff can also repair your water leak damages and broken down components – for all things fireplace and chimney, trust us.